Pe water supply pipe is flattened?

2024-01-29

Author:

Number of views:


Generally speaking,pe water supply pipeThe material is very hard and not easy to be flattened, but if the composite pipe is flattened, it will seriously affect the normal use of the pipeline. In the face of this situation, how to deal with it?

Generally speaking, PE water supply pipes are unconventional after production. In many cases, in order to save space, large-diameter pipes will be placed on the bottom layer, and then stacked layer by layer. At this time, if the height does not exceed 2.5m, The pipe will not be damaged or crushed.

However, if a small diameter pipe is installed inside a large diameter pipe, the pipe at the bottom will be greatly compressed, causing the pipe to deform and flatten. Of course, this is not a quality problem of the pipe, but a wrong storage and transportation method. Therefore, the flattening of the pipeline is mostly in terms of storage and transportation.

Usually after the pipe is flattened, we have to evaluate and test it to see if the deformation is serious and whether it affects the use. If there is no problem with the pipe, it can be handled with a round utensil. This method is convenient and correct.

If there is no corrector, you can only knock the pipeline to restore it to its original state. It should be noted here that this method is not good and can be used in emergency situations.

Therefore, when the PE water supply pipe is crushed, in addition to these methods, attention must also be paid to the aspects that can be crushed.

Yulong Pipe Industry is a high-tech enterprise specializing in the production, research and development, sales and installation of polyethylene green and environmentally friendly new pipes. The company vigorously promotes new product development and technological innovation, pays attention to product quality, and relies on an effective quality management system to provide customers with reliable Product quality and high-quality technical services.