PE water supply pipe welding common way



Number of views:

About different types of pipes, the following will introduce and explain, or explain related knowledge, especially for pe water supply pipes. We can learn and understand it, so that we can use it correctly and reasonably, and obtain good economic benefits, rather than wrong use. water supply pipeCommon methods of welding

The common way of PE water supply pipe welding is to heat the pipe end first, then make it contact with tools, and then cool it under a certain pressure for butt welding, so that the connection effect is good. And this method is very simple and easy to operate, so it is widely used.

2. Can PE water supply pipes be used for sewage treatment?

Pe water supply pipe can be used for sewage treatment, also known as sewage treatment with pe water supply pipe, is a special pipe for sewage treatment. Due to the use of high-density polyethylene raw materials, commonly used in municipal engineering and sewage treatment industry. It is characterized by wear resistance, high temperature and pressure resistance, corrosion resistance, and can be used instead of steel pipes.

3. pressure rating and diameter of pe water supply pipe

The pressure levels of pe water supply pipes are mainly 0.6MPa, 0.8MPa, 1MPa and 1.25MPa, but there are many specific types of pipe diameters of pe water supply pipes, which will not be illustrated here. The diameter of the PE water supply pipe is in millimeters. The different diameters, in terms of wall thickness, are also different.

4. Product standards and design standards. pe water supply pipe is the same?

Obviously, the answer to this question is no, that is, the product standards and design standards of PE water supply pipes are different. Because the former is the standard of product quality, the latter is the reference standard of product design. And, in the standard amount, is not the same. Therefore, we must have a correct understanding of this point and do not make mistakes.